Hello, welcome to the official website of Yantai Desman Sealing Technology Co., Ltd.!
Shock Absorber Series | Nylon Plate Series | Leather Cup Series | Rubber Plug Series | Oil Seal Series
Four Major Factors Causing Oil Seal Leakage
When the oil seal is working normally, a layer of floating oil forms between the oil seal lip and the shaft. This floating oil not only serves a sealing function but also provides lubrication. The fundamental cause of leakage analyzed by the Guangzhou oil seal factory is: when the contact pressure between the oil seal lip and the shaft decreases, and the interference fit between the installed oil seal and the shaft diameter is too small, oil leakage is prone to occur.
When the oil seal is working normally, a layer of oil film forms between the oil seal lip and the shaft. This oil film not only acts as a seal but also provides lubrication. The root cause of leakage analyzed by Guangzhou Oil Seal Factory is: when the contact pressure between the oil seal lip and the shaft decreases, and the interference fit between the installed oil seal and the shaft diameter is too small, oil leakage is prone to occur. There are many types of oil seals used in mechanical equipment such as excavators. Depending on the installation position, there are several types of oil seals to choose from. Although there are many types of oil seals, there are only four factors causing oil leakage: the oil seal, the oil, the rotating shaft, and the installation method.
1. Oil seals generally have two problems:
The first is poor quality of new seals, meaning they are of inferior quality. This requires everyone to have a certain ability to identify products and correctly choose the standard oil seal they need.
The other is that after long use, the oil seal becomes brittle, its ductility weakens, and sealing performance declines. This is normal wear and tear of the vehicle and requires replacement with a new oil seal.
2. Rotating shaft issues:
When the shaft surface has high roughness, rust spots, burrs, etc., it should be smoothed with gauze before installing the oil seal. At the same time, clean grease should be applied to the corresponding position of the oil seal lip or shaft diameter.
Keyword:
Service Hotline:
Address: No. 119 Hongfu Street, Fushan District, Yantai City, Shandong Province
Email:376497184@qq.com
Scan
Learn More
News