Seals improve the working efficiency of hydraulic equipment


The operator of the hydraulic press must be familiar with the principles of the hydraulic system, understand the functions of the main hydraulic components and seals of the equipment, and master the system operation sequence. Before starting the equipment, all moving mechanisms and solenoid valves should be checked to ensure they are in their original positions, and the oil level in the tank should be inspected. If any abnormalities or insufficient oil levels are found, starting the hydraulic pump motor is prohibited, and maintenance personnel should be contacted for repairs.

1. The operator of the hydraulic press should be familiar with the principles of the hydraulic system, understand the functions of the main hydraulic components and seals of this equipment, and master the system operation sequence.

2. Before starting the equipment, check whether all moving mechanisms and solenoid valves have returned to their original positions, and check the oil level in the tank. If any abnormalities or insufficient oil are found, starting the hydraulic pump motor is prohibited, and maintenance personnel should be contacted for repairs.

3. The operator should regularly check the working condition of the hydraulic system, observe the working pressure and speed, and inspect the dimensions of the workpiece and the wear of the tooling to ensure the hydraulic system operates stably and reliably.

4. In winter, when the oil temperature in the tank has not reached 25°C, the actuators cannot start working in sequence and only the hydraulic pump motor can be started to run the pump idle. During summer operation, when the oil temperature in the tank exceeds 60°C, pay attention to the hydraulic system's working condition and notify maintenance personnel for handling.

5. Operators must not damage the interlock devices of the electrical system, must not manually push the electric control valves, and must not damage or arbitrarily move the positions of any operation levers.

6. For hydraulic press equipment that has been stopped for more than 4 hours, before starting work, the hydraulic pump motor should be started for 5-10 minutes before applying pressure.

7. When a fault occurs in the hydraulic system, the operator must not tamper with it privately and should immediately report to the maintenance department.

8. Hydraulic equipment should be kept clean regularly to prevent dust, cutting fluids, chips, cotton yarn, and other debris from entering the oil tank.

For more information, please visit the Desiman official website: http://www.desiman.cn/

Keyword:

Previous

Next

Previous

Next